The composition of the conveyor chain

The conveyor chain uses the chain as the traction and carrier to transport the material. The conveyor chain can use the ordinary sleeve roller conveyor chain, or various other special chains (such as accumulation and release chains, double-speed chains).

The standard width of conveyor chain is 200, 300, 400, 500, 600, 700, 800, 1000, 1200, 1500, 2000mm, etc. Other special specifications can also be adopted according to customer needs. The conveying chain has a large conveying capacity, mainly conveying pallets, large turnover boxes, etc. The conveying chain has a variety of structures and has a variety of accessories, which is easy to realize accumulation and conveying, and can be used as an assembly line or as a storage and transportation of materials. The conveyor chain power roller table is composed of power roller barrel assembly, aluminum side plate, film frame, tie rod, bearing seat, driving device and chain.

The unpowered roller table is composed of unpowered roller barrel assembly, aluminum side plate, film frame, tie rod and bearing seat. The conveyor chain power roller table is driven by the driving device to drive the traction chain, and the chain drives the sprockets on each power roller barrel to rotate, so that the rotating conveying work. The unpowered roller table of the conveyor chain is driven by people to push and pull the workpiece or the workpiece squeezes the workpiece, and moves on a free roller.

Application of conveyor chain

Conveyor chain sprockets are widely used in mechanical transmission in chemical, textile machinery, food processing, instrumentation, petroleum and other industries. Small-diameter sprockets are generally made of integral type, and medium-diameter sprockets are mostly made of spoke-plate type. In order to facilitate handling, clamping and weight reduction, holes are opened on the spoke plate, and large-diameter sprockets can be made of combined type. Rings and wheel cores can be made of different materials.

As a common transmission force device, the conveyor chain reduces friction through the "chain" design of the hyperbolic arc. It is used in places where the power is relatively large and the running speed is relatively slow, which has obvious advantages over belt transmission, such as Tanks, pneumatic compressors, etc., but the transmission speed can not be too fast, because the flexibility of the chain is not as good as the belt transmission. It consists of inner and outer links. It is composed of five small parts: inner chain plate, outer chain plate, pin shaft, sleeve and roller. The quality of the chain depends on the pin shaft and sleeve.

The standard transmission roller chain is a general-purpose transmission roller chain based on JIS and ANSI standards. The leaf chain is a hanging chain composed of a chain plate and a pin shaft. Stainless steel chain is a stainless steel chain that can be used in special environments such as medicine, water and high temperature. A standard attachment chain is a chain with attachments attached to a standard roller chain for transmission. Hollow pin chain is a chain connected with hollow pins, and accessories such as pins and cross bars can be freely attached or removed according to customer requirements. Double pitch roller chains are double pitch chains of standard roller chains based on JIS and ANSI standards. It is a light-weight, low-speed transmission chain of average length, suitable for installations with long distances between shafts.